Comfortable operating with advanced cable
Newly developed 26-pin multi-cable has enabled to transmit 2 x HD-SDI transmission in addition to 26-pin.
It realizes comfortable cable operating with a dedicated cable to lead the cable around with only one cable.
It supports HD-Y return and HD-SDI return.
Base station ES-600 has a cable equalizer circuit of HD-SDI signal.
Professional system will be constructed with separately sold 7-inch viewfinder HDF-700.
The base station has 2 cable equalizer circuits of HD-SDI signal.
Built-in 2W intercom
It can connect to 2W intercom for broadcast directly which is used in fields.
Connecting with Canon 3P terminal. (PROTECH intercom FD-300A requires interface separately.)
Capable of power supply
ES-300/500 can power supply in combination with ES-600. ES-500 can power supply camlight or prompter from DC12V camera power source and CAMTAP of the camera body. (Only when the camera has a CAMTAP output (light terminal)) ES-300 can power supply DC8.4V, camlight or prompter.
Always attachable camera adaptor ES-500
Cables can be routed cleanly. It can be used as an EMG camcorder immediately when being detached multi connector cable and attached battery to the back of the camera adaptor ES-500.
The remote control of target camcorder becomes possible with the remote controllers like Sony RM-B150/B170/B750, and Panasonic AG-EC4G.
Viewfinder interface unit
Tally and return video images can be confirmed with Viewfinder interface unit VIF-100/100P and the like. It can be confirmed in viewfinder of the camcorder when using VF interface unit.
Support analog HD components
It supports multi camera video filming with analog HD components.
Hyper limiter built-in phantom power supply microphone, LINE input
Hyper limiter produced in PROTECH audio branch is built-in the camera adaptor ES-500, and it transmit sound source from camcorder to center station ES-600 preventing clipping noise caused by sudden excessive input.
Note. Features, design and specifications are subject to change without notice.
●HD-SDI supports 26 pin cable(10m/25m/50m)
●Headset for intercom
●Cable for remote controller to connect with cam corder
●Cable to connect with mini monitor or VIF-100 etc
●Cable for sending tally signal from switcher to base station